How to Factory Reset Sony Soundbar to Factory Default Settings

Sony Soundbars are a great way to enhance your TV viewing experience with its powerful sound and sleek design. However, there may be times when you want to reset your soundbar back to its factory default settings. This could be due to various reasons such as troubleshooting issues or if you’re planning to sell or give away your soundbar.

Resetting your Sony soundbar is a simple process that can be done in just a few steps. In this guide, we will walk you through the different methods on how to factory reset your Sony soundbar.

Table of Contents

When should you reset your Sony Soundbar?

Before we dive into the steps on how to factory reset your soundbar, let’s first understand when it might be necessary to do so.

How to Reset Your Sony Soundbar: Step-by-Step Guide

Troubleshooting: If you’re experiencing issues with your Sony sound bar such as no audio or connectivity problems, resetting it to its default settings can often resolve these issues. This is because a hard reset essentially clears any saved settings and restores the soundbar to its original state.
Selling or giving away: If you’re planning to sell or give away your soundbar, it’s important to reset it back to defaults so that the new owner can set it up according to their preferences.
No Sound: In some cases, you may accidentally change the settings on your soundbar and end up with no audio. A hard reset can help resolve this issue and bring back the sound to your device.

Subwoofer connection problem: If your subwoofer is not connecting to your soundbar, a factory reset can often fix this issue.
Connectivity Problem: When your Sony soundbar refuses to connect with an audio source, resetting it can solve the connectivity issues. Enjoy uninterrupted audio bliss with your soundbar!
Software Bug: In rare cases, a software bug may cause problems with your soundbar. A default setup can help resolve firmware issues and restore your device to its optimal performance.

Now that we understand the different situations where resetting your Sony soundbar may be necessary, let’s take a look at a step-by-step guide on how to do that.

How to Factory Reset Sony Soundbar using Remote Control

Now you know why your sound bar needs resetting, let’s learn how to reset your Sony soundbar. The easiest and most convenient way to factory reset your soundbar is by using the remote control that comes with your device.

First, switch off the Sony soundbar and disconnect the power plug from its source.

Wait for 30 seconds, then turn it back on and use the remote to navigate the menu.
To reset, navigate through the up and down arrows on the menu and select “Reset”.
To restore the Soundbar to its factory settings, click on the “All Reset” option and press Enter. Confirm the action by selecting “Yes”.

Wait for a few seconds for the soundbar to reset, and then turn it off.

Congratulations! You have successfully done hard reset Sony soundbar using the remote control This is a general method. If you have a Sony soundbar models like HT-S40R soundbar you need to follow this method:

Method 2 For Sony HT-S40R soundbar:

Press the MENU button on the remote control.

Go to the “Setup” section and then click on “Advanced Settings”.
Choose Resetting.
Choose the menu item you want to reset.

Click on Start.

Perform a reset on the HT-A3000/HT-A5000/HT-A7000/HT-A9 model.

If you own a Sony HT-A3000/HT-A5000/HT-A7000/HT-A9 soundbar’s, follow these steps to factory reset Sony sound bar:

For HT-9A: To initiate a reset on your HT-A9 model, simply press and hold the power button located on the control box for at least 10 seconds.

For HT-A3000, HT-A5000, and HT-A7000:

Press and hold the POWER button and – (volume down) button simultaneously on the soundbar for more than 5 seconds.
The soundbar will power off and reset.

How to Factory Reset Sony Soundbar without Remote Control

In case you’ve lost your remote or don’t have access to it, you can still reset your Sony soundbar’s using the input buttons on the device itself. Here’s how:

Method 1: Button Combination Reset

This method works for a wide range of Sony soundbars. Here’s what to do:

Locate the buttons on the bar or speakers. These are usually located on the top or front panel. You’ll need to identify the Power button, the Volume Down button, and, in some cases, the Input Select button.

To reset your device, press and hold the Power button and the Volume Down button simultaneously for 5-10 seconds. Some models may require holding the Input Select button. Look for blinking indicator lights or a flashing audio indicator to confirm the reset process is in progress.
Release the buttons once the indicators signal that the reset is complete.
Now, unplug its power cord from the wall outlet for 30 seconds to a minute.

Reconnect the power cord and press the Power button on the soundbar to turn it on.

Method 2: Factory Reset Button

Some newer Sony soundbar models might have a dedicated Factory Reset button. This button is usually located on the back or bottom panel, often recessed or hidden beneath a cover. Here’s what to do:

Locate the Factory Reset button on your soundbar. Consult your user manual or look for a small hole or button labeled “Reset” or “Factory Reset.“

To perform a factory reset, press and hold the Factory Reset button for 5-10 seconds using a paperclip or a thin object.
The soundbar may power off or reboot, indicating the reset is in progress. Please wait for it to complete.
After the reset, the soundbar should either power back on automatically or require manual activation by pressing the Power button.

Additional Tips:

If you’re unsure about your specific soundbar model or the reset method, consult the user manual that came with your soundbar or check the Sony support website for more information.
If neither of these methods works, there might be a deeper issue with your soundbar. In that case, it’s best to contact Sony support for further assistance.

How to Update Sony Soundbar Firmware

How To Update Firmware On Your HT-A7000, HT-A5000 or HT-A9 Home Theater Systems

In addition to a factory reset, updating your Sony soundbar Home theater system firmware can also help resolve issues and improve performance. Here’s how to update your firmware:

First, make sure your soundbar is connected to the internet via Wi-Fi or Ethernet cable.
On the remote control, press the Home button and select Settings.

Go to System Settings > Software Update > Update via Network.
Follow the on-screen instructions to complete the update process.

Depending on your model, you may also be able to update your firmware using a USB drive. Consult your user manual for specific instructions.

Conclusion

Resetting Sony soundbar can help resolve a variety of issues, from connectivity problems to software bugs. We recommend trying a hard reset as a first step before seeking further support or repair services. With the simple steps outlined in this guide, you can easily perform a hard reset on your Sony soundbar using either the remote control or buttons on the device itself. Enjoy an uninterrupted audio performance from your Sony soundbar!