How to Fix Skullcandy Earbuds One Side Not Working?

Skullcandy is a popular brand that produces high-quality headphones and earbuds. However, like any electronic device, they may sometimes face issues such as one side not working. This can be frustrating, especially if you rely on your skullcandy earbud for daily activities like listening to music or taking calls.

In this guide, we will discuss the possible reasons why your Skullcandy One earbuds may have one side not working and how to fix it.

Possible Reasons for One Side Not Working

There can be several reasons why one side of your Skullcandy Bluetooth earbud not working. Some common causes could be as follows:

• Low battery: If your Skullcandy wireless earbuds have been in use for a while, the battery may be low and need to be charged.
• Pairing issues: If you are using wireless earbuds, there may be pairing issues between the earbuds and your Bluetooth devices.
• Dirty earbuds:  Just like wired earbuds, wireless earbuds can also get clogged with earwax and debris. Use a soft, dry brush or toothpick to carefully clean the mesh grills from earbuds and charging case.
• Software issues: Check for any software updates available for your earbuds sesh. Updating the software may fix bugs that are causing the issue.
• Faulty earbud: Similar to wired earbuds, sometimes a wireless earbud can malfunction internally. If none of the above solutions work, your earbud may be damaged.
• Battery depleted: If your one earbud have been in use for a while, the battery may be depleted and need to be replaced.

How to Fix Skullcandy Earbuds One Side Not Working

Now that we have discussed the possible reasons why the left or right side of your Skullcandy earbuds may not be working, let’s move on to how you can fix it.

Charge your earbuds:

Start by checking if your right or left earbuds have enough charge. If the battery is low, place the earbuds in their charging case correctly. Make sure the case has sufficient battery for a full charge. Leave the earbuds in the charging case for at least 30-40 minutes before using one of the earbuds.

Cleaning your Earbuds:

If your earbuds are dirty, it can affect the sound quality and cause one side to stop working. Use a soft cloth or cotton swab dipped in rubbing alcohol to gently clean the mesh grills and contact between the charging pins of your earbuds. Be careful not to get any liquid inside the earbuds as it may damage them and don’t forget to clean the charging port as it is also necessary for proper functioning of your earbuds.

Additionally,  After cleaning, allow the earbuds to charge in the case for 15-30 minutes before retesting them.

Connection:

To ensure optimal charging, it is important to make sure the left earbud and right earbud are securely seated in the charging case and are making proper contact with the charging pins. This will help to maintain a reliable and efficient charging connection, ensuring that your earbuds are ready for use whenever you need them.

Pairing issues:

For example, if your Skullcandy left earbud not working properly unpairing and then re-pairing your earbuds with your device.  Make sure to follow the correct pairing procedure as outlined in your earbuds’ user manual. If this does not work, try resetting your earbuds as mentioned below.

Mono audio setting:

If your Left earbud is not working properly that may be because you are using your earbuds with a device that has a mono audio setting enabled, it may cause one side to not work. Go to your device’s settings and disable the mono audio option.

Maintain a connection within the Bluetooth range.

While new earbuds and phones generally provide a much better Bluetooth range than their predecessors from a few years ago, it’s still possible to encounter connection issues if you wander too far from the source device. These issues may affect one skullcandy earbud or both but don’t worry, it’s just a small hiccup along the way.

To ensure optimal syncing and pairing of your Skullcandy products with your device, keep them close to each other and close to your source device. It is recommended to maintain a distance within the standard Bluetooth range of 33ft. If you need to move away from your phone, be mindful not to exceed this range.

Resetting Skullcandy Earbuds:

If none of the above solutions work, your earbuds may need to be reset. This process may vary depending on the model of your earbuds. we are going to share two different ways to reset your Skullcandy earbuds.

Methods 1:

To reset your SESH/Indy Wireless Skullcandy earbuds, please follow these steps.

• Put the earbuds in the charging case. Ensure they’re properly seated and charging contacts are clean.
• Open the charging case lid.
• Simultaneously press and hold the earbud buttons for 10 seconds. Don’t release until the LED lights flash red and blue four times.
• Release the buttons and close the charging case lid for 5 seconds.
• Open the lid again. Your earbuds should now be reset and ready to pair with your device.

Method 2:

To reset your Skullcandy earbuds with this method check your earbuds from the list (Jib True 2, Jib True XT2, VINYL, SPOKE, SESH EVO), simply follow these steps.

• Place your earbuds in the charging case. Make sure they are seated correctly and charging contacts are clean.
• With the lid of the case open, hold both buttons on the earbuds by pressing and holding for 6 to 10 seconds. The LED lights will turn off after a few seconds, indicating that your earbuds have been reset.
• Charge the earbuds: Place them back in the charging case until the LEDs show red.
• Remove and pair: Take out the earbuds and they should automatically enter pairing mode. Look for the Skullcandy sesh EVO on your device and connect to them.

Updating Skullcandy Earbuds

Updating your Skullcandy earbuds can improve sound quality, fix bugs, and add new features. To update your earbuds you need to follow these simple steps:

• Make sure you have the Skullcandy app installed on your phone. You can download it for free from the App Store or Google Play Store.
• Open the Skullcandy app and connect your Sesh Evo earbuds to your phone via Bluetooth settings.
• Tap on the “Devices” tab.
• Select your Sesh Evo earbuds.
• Scroll down and tap on “About.”
• You will see the current firmware version of your earbuds. If an update is available, it will be displayed here.
• Tap on “Update Firmware” and follow the on-screen instructions.

Battery Replacement.

If none of the above solutions work, your earbuds still won’t charge then you may need a battery replacement. Check with Skullcandy customer service or visit an authorized repair center to get this done.

Remember, prevention is always better than cure. To prevent future issues, make sure to clean your earbuds regularly and avoid exposing them to extreme temperatures or water. With proper care and maintenance, your Skullcandy earbuds can last for a long time and provide you with excellent sound quality.

Contact Customer Service 

If none of the above solutions work, your earbuds may be faulty and will need to be replaced. Contact Skullcandy customer service for further assistance and potential warranty coverage. They will guide you on how to get a replacement if your earbuds are still under warranty.

Conclusion

Skullcandy earbuds are a great choice for those looking for high-quality audio in a compact and convenient form. However, like any electronic device, they may encounter occasional issues that can affect their performance. By following the tips and solutions outlined in this guide for your left or right earbud, you can troubleshoot and resolve the most common problems with your Skullcandy earbuds and ensure that they provide you with the best listening experience possible. 

F.A.Q

Why Are My Skullcandy Earbuds are Not Charging?

There could be several reasons why your skullcandy earbud is not working, such as a faulty charging case or dirty charging contacts. Try cleaning the charging case and making sure the earbuds are seated correctly before attempting to charge them again.

How do you fix a dead earbud?

If one of your earbuds is not working, try resetting it or updating the firmware. If these solutions do not work, you may need to replace the battery or contact customer service for further assistance.

How do I know if my Skullcandy earbuds are in pairing mode?

When you first turn on the right and left earbuds, they should automatically enter pairing mode. The LED lights will flash red and blue, indicating that they are ready to connect to your device.

Can I shower with Skullcandy earbuds?

No, Skullcandy earbuds are not water-resistant and should not be exposed to water. Avoid using them in humid or wet environments to prevent damage. However, some Skullcandy models are designed for water resistance, such as the Indy Evo. Check the specifications of your specific earbuds before use in wet environments.